The LT2000 EX is Okuma’s highly flexible and profitable twin spindle turning center in the 6-inch chuck class. With the ability to combine the upper and lower turrets with either spindle, this machine enables process flexibility, very high feature utilization and the ability to complete the greatest amount of primary and secondary machining possible in one compact platform. The machine can be specified in a large number of different configurations to maximize the benefits for specific circumstances. It is available in either two or three turret versions, with or without Y axis, to provide best process balance and production throughput and integrated operations. This multi-function horizontal twin-spindle machine integrates lathe and mill/drill functions on all turrets. Thirty two tool stations are available for either mill or lathe function for the twin-turret machine and 48 for the 3-turret machine.
The LT2000 EX uses Okuma’s open architecture, PC-based THINC®-OSP P300 control. With attention to how machinists actually operate machine tools, this control was created with “Easy Operation,” where commonly used processes are conveniently grouped together. This creates an efficient platform for both novice and experienced machinists to efficiently complete their tasks.
|Maximum Turning Diameter||mm (in)||Ø 210 (8.27)|
|Spindle Nose Type||Ø 140 [Opt. A2-6]|
|Speed Range||min⁻¹||50~6,000, 50~4,500|
|Standard Power||kW (hp)||L/R: 11/7.5 (15/10) [22/15 (30/20)]|
|Rapid Traverse (X/Z)||m/min (ipm)||30/40 / (1,181/1,575) C: 200 rpm, Y: 15 (591)|
Hartwig Helps People in Manufacturing Control Their
Destiny Every Day.
Our Contact Info:
10617 Trenton Avenue
St. Louis, MO 63132
Phone: (314) 426-5300
Fax: (314) 426-5311
Need Okuma Service After Hours?
Please Call: (314) 493-9999