RigiMill

Manufacturer: MODIG
Type: Machining Center Mills

For the first time ever it is possible to operate one machine for optimal roughing and optimal finishing. RigiMill – two different machines on one bed, configured with the customized gantries you require for milling aluminum or titanium. The footprint occupies one-third less space than other gantries. Cycle time is reduced 30-50%.

Just think what that does to optimize productivity and reduce tooling costs. Per minute chip removal rates up to 55 cubic inches in titanium and 970 cubic inches in aluminum make this machine a world leader.

Excels at these parts:

  • Stringers/Spars
  • Leading Edge
  • Wing Spars
  • Wing Ribs
  • Bulkheads
  • Nacelles
  • Flap Tracks
  • Landing Gear Beams
  • Engine Mounts

Featured Specifications

Maximum Workpiece (3-Axis) X/Y/Z mm (in) 1500/1,200/600 (59/47.2/23.6)
Maximum Workpiece (5-Axis) X/Y/Z mm (in) As Built/670/600 (As Built/26.4/23.6)
Controlled Axis  → X/Y/Z/A/C
Travel X/Y/Z mm (in) As Built/1,560/900 (As Built/61.4/35.4)
Spindle Type / Speed min-1 (rpm) SK-A63, 80, 100, 125 / (4~30,000)
Spindle Power kW (hp) 125 (167) or 150 (200)
Rapid Traverse X/Y mm/min 70,000/60,000
Magazine Capacity  → 40 [opt. 120, 200, 300]
Tool to Tool/Chip to Chip sec. 4 / 9
Work Piece Materials  → Al, Composite, Steels, High-Temp Alloys