Oklahoma City, Oklahoma - Since it's inception in 1966, CMP Corporation has transformed itself from a one man shop to the 120+ employee, leader in quality compressor component parts and custom manufacturing it is today.

(534 KB Adobe PDF - link opens in a new window)

Odessa, Texas - Find out how 401 Kable achieved maximus results in minimum time with an Okuma.

(534 KB Adobe PDF - link opens in a new window)

Wichita, Kansas - C.E. Machine Company has recently installed an Okuma MA500HB with a Fastems FMS. The precision CNC machining firm (milling & turning) produces and assembles small and medium sized parts for the aircraft and defense industries.

(534 KB Adobe PDF - link opens in a new window)

St. Louis, Missouri - R&S Machining has recently installed an Okuma MU-400VA 5-axis machining center. The 16-year-old firm founded by Tom Roderick and Mike Stockglausner, specializes in precicison machining and EDM work. 

(534 KB Adobe PDF - link opens in a new window)

Peoria IL - When Alcast Company in Peoria IL decided to purchase another lathe to increase their machining capacity it was a very important decision. 

(534 KB Adobe PDF - link opens in a new window)

East Peoria IL - In 2007, Ray Machine & Mfg, a subsidiary of Kemp Mfg, purchased their 5th Okuma lathe and 4th L370M with live tooling. The results have been increased business and profit,

(534 KB Adobe PDF - link opens in a new window)

Precision Cutter & Tool Company, Lebanon, Missouri, is celebrating its 20th anniversary and has recently installed three pieces of Okuma CNC equipment.  The company builds and repairs progressive tooling, builds special machines, provides CNC machining (including hard milling and high-speed machining) and wire EDM work.

(534 KB Adobe PDF - link opens in a new window)

Sullivan, IL - When Hydro-Gear presented Hartwig, Inc. with the request to replace 10 existing vertical machining centers that were being hand loaded with 4, more accurate and rigid machines    

(534 KB Adobe PDF - link opens in a new window)

Valley Center, KS - Safarick Tool Inc. has recently completed their 45th year of business and installed a new Okuma MB 56 vertical machining center.   

(534 KB Adobe PDF - link opens in a new window)

Wichita Ks. - Brian and Tami Eck of C.E. Machine are owners of several Okuma Machines  

(534 KB Adobe PDF - link opens in a new window)

"I learned my advanced programming at Hartwig, Inc.'s classes and seminars. I learned more about programming in two trips to Hartwig then I have anywhere else." 

(534 KB Adobe PDF - link opens in a new window)

I want to thank you and your team for making the test cut activity a success and we are looking forward to getting this project across the goal line. Please share my comments attached to make sure that the folks that made this happen realize Centrilifts gratitude for their efforts.

(534 KB Adobe PDF - link opens in a new window)

After working 35 years in the aerospace industry, Jerry and Debbie Kiser decided to go into business for themselves and started Kiser Manufacturing in 1996.

(534 KB Adobe PDF - link opens in a new window)

ICON Machine Company was started in April of 1999 by Russell Hawkins, Brian Mahaffey and Wes Gurley. The gentlemen had nearly 20 years of experience on Okuma equipment and decided they would build their business using Okuma lathes.

(534 KB Adobe PDF - link opens in a new window)

Novatech Corporation (changed to Novatech Limited in 2004) was founded in 1970 to provide Inertia-Friction Welding to the energy industry and automotive after-market as a service.

(534 KB Adobe PDF - link opens in a new window)

Ehrhardt Tool & Machine Co., Inc. located in Granite City, Illinois is primarily a manufacture of precision stamping dies and special machinery for the appliance, HVAC, and commercial nuclear fuels industries.

(534 KB Adobe PDF - link opens in a new window)

H Tool and Manufacturing (formerly known as Hofmann Tool Co.) has a reputation for excellence in the metal stamping and aluminum die cast industries.

(534 KB Adobe PDF - link opens in a new window)

HN Automotive is a quickly growing manufacturing organization serving the automotive industry located in Effingham, IL.  The shop continues to expand as the company continues to rate as a preferred supplier to automotive giants such as Ford and Daimler Chrysler.

(534 KB Adobe PDF - link opens in a new window)

Custom Tool, located in Paris, Illinois opened its doors for business in October 1974.  Bob Wilson founded the company based on a vision.  With a solid background as a tool & die maker his entrepreneurial spirit coupled with a keen imagination has proven to be a winning combination.

(534 KB Adobe PDF - link opens in a new window)

Close to two years ago LaVerne Beale, of Current River Die Casting, happened to be looking for a high speed machining center to do some machining on their forging dies. Hartwig, Inc. happened to be walking in the door with the right answer at the right time.

(534 KB Adobe PDF - link opens in a new window)

Just outside of St. Louis County is a high end machine shop called R&S Machining. The owners, Tom Roderick and Mike Stockglausner started their shop nearly 15 years ago running only manual equipment.

(534 KB Adobe PDF - link opens in a new window)

Click the headline to read the full testimonial.